Folsom Roofing: Article About Installing Faux Slate Roofs
Environmentally conscious homeowners will be pleased to know that there is a new type of rubber roof made from recycled materials. They will be even more pleased to know that this material is available in a faux slate style. Slate is one of the most beautiful types of roofing, and homeowners with deep pockets and sturdy houses have long considered it a favorite. Now the attractive slate look is accessible to anyone.
The process for installing this sort of roof is similar to the installation of most roofing materials, but there are some differences. The unique combination of the rubber material and the slate shingle shape mean that roofers have to follow slightly different procedures than they normally would.
The first thing a Folsom roofing company installing faux slate shingles will do is remove the old roof. Normally, rubber roofing can be installed over existing roofing. However, this is not recommended with this sort of shingles. It will be difficult for the roofer to install the shingles properly. Also, the roof may not look as natural as the homeowner would like. The method of removing the old roof varies based on what material the old roof is composed of. If it is traditional rubber roofing, it is cut off.
A Roofing from Allstate Roofing of Folsom CA would be happy to answer any question you have about storm damage or skylights.
If it is made up of shingles, the roofer will use a special tool to pry them off.
Once the old roof has been removed, the new roofing felt is installed. The old roofing felt will usually be left in place. It provides additional protection against inclement weather, and does not add a great deal of weight to the roof. The new felt is installed by unrolling the material in strips and using a staple gun to staple it down.
After the new layer of roofing felt is installed, it is time for the roofer to install the drip shield. This metal railing will force the water away from the roof, thus protecting it from some of the water it is exposed to. The drip shield is made out of hand cut aluminum, and is nailed to the perimeter of the roof.
Next, it is time for the first row of shingles to be installed. Roofers always install the shingles around the edges of the roof first and work their way up the slope. The shingles are nailed to the roof, with nails in both the bottom and top parts of the shingle.
Once this is done, the roofers will repeat this process as they work their way up to the top of the roof. They will usually save heavily sloped areas for last. This is because these areas require great care to shingle.